2023 Kohler Engine Command PRO CH740

We come to you anywhere in and around the GTA!

We are a mobile repair company that specializes on working with snow blowers, lawn mowers, and other small motor-type equipment.

Services
Free Quote

2023 Kohler Engine Command PRO CH740

DESCRIPTION

Command PRO CH740

You work your tail off 12+ hours a day. It’s time to hold your engine to the same standard. With extended maintenance intervals and fuel-efficient operation, KOHLER Command PRO engines work as hard as you do..

FEATURES

  • Integrated oil coolers extend oil-change intervals and maintain low temperatures during the entire power range
  • High-efficiency, heavy-duty air filters provide protection from debris and ensure longer service intervals
  • Extra-large sleeve bearings support heavy loads in commercial and industrial environments

SPECIFICATIONS

  • Engine type: 4-cycle, gasoline, OHV, cast iron cylinder liners, aluminum block
  • HP: 25 HP (18.6 kW)
  • Displacement: 44.0 cu. in. (725 cc)
  • Bore: 3.3 in. (83 mm)
  • Stroke: 2.6 in. (67 mm)
  • Gross Torque: 39.2 ft. lb. (53.1 Nm)
  • Compression Ratio: 9:0:1
  • Dry Weight: 94 lb. (43 kg)
  • Oil Capacity: 2 US qt. (1.9 L)
  • Lubrication: Full pressure w/full-flow filter
  • Dimensions LxWxH: 14 x 17.7 x 19.0
  • Certified Power: 24.4 HP (18.2 kW)
  • Certified RPM: 3600
  • Emissions Compliance: EPA Phase III, EU Stage V, CARB Phase III, China Phase II
  • Engine Type: Commercial
  • Backpressure Limit 2: 50

EQUIPMENT TYPES

  • Hydraulic Power Pack
  • Concrete Screed
  • Concrete Trowel
  • Cement Mixer
  • Chipper
  • Aerator
  • Go-Kart
  • Ground Pounder
  • Stump Grinder
  • Concrete Saw
  • Welder
  • Pressure Washer
  • Log Splitter
  • Edger
  • Compressor
  • Tiller
  • Pump
  • Generator
  • Blower
  • Lawn Vacuum

PRODUCT SPECS

ENGINE

Engine Type 4-cycle, gasoline, OHV, cast iron cylinder liners, aluminum block
Bore x Stroke 3.3 in. x 2.6 in. (83 mm x 67 mm)
Displacement 44.0 cu. in. (725 cc)
Compression Ratio 9:0:1
Horsepower 22.5 HP (16.8 kW); Certified: 24.4 HP (18.2 kW)
Torque 39.2 ft. lb. (53.1 Nm)

DIMENSIONS

Length 14 in.
Width 17.7 in.
Height 19 in.
Weight 94 lb. (43 kg)

Need Help? We Are Here To Help You!

Give us a call today for any of your small engine repair needs.

Request Quote

FAQs

1. Who are the on spot?

Onspotrepair.ca is an owner operated small engine repair and maintenance Company. Our head office is based in Stouffville Ontario, and we service equipment at your home, place of business or construction site. This business was started by the owner, who saw the need to create a efficient and well equipped small engine repair service that took the hassle out of transporting your heavy equipment to the repair shop. Our primary goal is to make it both easy and cost-effective for you to get your power equipment serviced.

2. Do I have to pay an extra pick-up or delivery charge?

No! This is the entire premise of our philosophy. We come to you and do the work at your site so there is no pick up or delivery charge. If your equipment requires parts that have to be ordered a part supplier will deliver the needed part the same day or we will schedule another day for the service. You just pay for parts and labour.

3. What do I need to provide for the technician when they are at my house?

We custom built our vehicle to do the service or repair at your house with nothing needed. However, in case of any emergency, we need to have access to your water and a power source.

4. What happens if I'm not home during the repair or service appointment?

That’s perfectly fine. Just call our office and we will provide you with instructions on where to leave your equipment.

More FAQs